No.
10 TRSB Stationary Head
Diameter range of 5/8" - 1 1/4" (2.0 -
3.5 ISO)
For application where the part rotates and
the threading tool is stationary. Non-revolving heads
are ideal for turret lathes, hand and automatic screw
machines, and other stationary tool applications.
Automatic opening of the TRSB Stationary Head is affected by interrupting the forward travel of the
machine slide or carriage. Reset is done manually by
handle or by cam.
Three hardened driving pins, mounted in the adjusting
ring, secure the head in the closed position. As the
head pulls off, the driving pins withdraw from the
closing ring which is under spring tension.
Specifications:
No. 10 TRSB Stationary Head
No.
10 TRSB Stationary Head
A tool used on live spindle machines.
Revolving heads are ideal for bar automatics and other
live spindle machines, and for tapping, drilling, and
threading machines.
Opening action of the TRRB Revolving Head is affected by
interrupting the forward travel of the operating yoke.
The yoke is also used to reset the head.
Three hardened conical closing pins, mounted in the
adjusting ring, engage the closing ring to lock the head
closed.
Specifications:
No. 10 TRRB Revolving Head
