Landis
Reamer Program
Landis Reamers for reaming, chamfering, and facing come in four basic styles - solid, detachable blade, insert blade and composite.
The style supplied will depend upon the operation to be performed and the
type of Landis die head in which it will be used. They can be identified by a symbol number stamped or etched on one of the flutes of the solid
and composite reamers and on each one of the blades of detachable and insert blade-type reamers.
Technical
Paper:
Reamer
Configuration and Grinding
Solid Reamers
Solid reamers, which are four fluted, can be used for all T type LANCO internal trip heads from the 3/4"
6T to the 4" 32T, the 16TXX Lanco and the 2" 16JNK internally tripped
Landex.
Detachable Blade
This four fluted reamer uses replaceable blades which are attached to a reamer body with screws. It is
supplied only for the 4" 32T Lanco head for 2-1/2" to 4" pipe.
Insert Blade
The six fluted insert blade is only supplied for the full range of the 6" 48T head.
Its replaceable blades are secured in the reamer body by an abutting ring and
clamping plate.
Composite
Composite reamers consist of an auxiliary reamer driver, chamfering body, reamer
nose, spacer, and shoulder screw. It is used only with the 16TXX die head for 2-1/2" to
4" pipe sizes.
